Magicshine clone lights - XM-L

I've got a couple of these Magicshine clone lights. The both have an XM-L led emitter but the controllers are a little different.

Light one has high, low and strobe. Light two has high, medium and low.

Both lights on high draw 1A from a 7.4V supply.

Current draw

FunctionLight 1 Light 2
High1A1A
MediumN/A0.5A
Low0.2A0.2A
Strobe0.5AN/A

A battery pack made from 2 of the new 3400mAh panasonic cells should power these lights on high for almost three hours.

Related articles:

Magicshine (clone) battery repair

I noticed that my battery pack was giving me intermittent results, so I removed the heatshrink outer and found this:

AC Mini-Le cranks

Crank is made from aluminium and uses a square taper bottom bracket.

Shimano XTR CS-M970 lockring

Aluminum lockring that comes with XTR CS-M970 9 speed clusters - weight 5g. Standard steel lockrings are around 15g so switching to an alu version will save you an easy 10g.

Going 1x10 - the essentials

The key to getting the best out of your 1 x 10 setup is to have the right mix of components. Everything is a compromise and going 1 x 10 is no exception.

XT 9-speed cassette

In 11-32 cassette weighs 271g:

Wellgo WR-1 flat pedals

Great lightweight flat pedal for the kids. 220g and around $30. Ti axles are available for further weight loss.

Content-type: text/html Error
Sorry, the application you are using has encountered an error.

Please click on this link to report the error: REPORT ERROR