Brake hose weighs 40g for 200cm of hose including the banjo end fitting. This is extremely light hose.
Related articles:
The great foam ring debate
The internet is awash with contradictory advice on whether or not its better to retain the factory foam oil rings that sit beneath the dust seals on various forks. Well here's my take - foam rings, regularly cleaned ...
Hope X2 floating brake rotor
Quick facts:
Formula RX brakes
These are MY2012 versions and so feature the newer graphics as well as lever code numbers of FD532XX and caliper code numbers of FD520XX (last two digits denotes colour of master cylinder, caliper and/or annodized bore cap).
Kids short reach brake levers
Here's some information on brake levers that I've used on my kids bikes and that work nicely for little hands.
Brake pistons won't retract fully
This is a common scenario. You replace your worn out brake pads with new pads and lo and behold, you can't get the pistons in the brake caliper to retract fully, so with your new pads ...