Art 3D forged 50mm stem


Art 3D forged 50mm stem

Quick facts:

  • 50mm stem length;
  • 31.8mm bar clamp with with four 5mm x 16mm allen head bolts to hold the faceplate;
  • weighs 132g;
  • steerer clamp system used two opposing 6mm x 20mm allen head bolts.

Comments

  • The bar interface on the stem looks good. There is a nice radius to the clamp area, so no sharp edges that might damage or unduly stress a carbon bar;

Bar clamp area close-up
  • The face plate is not as good. Its got some non-slip texture to it (which isn't a problem), but the edges are a little sharper than the stem. Some light filing will sort that out.

Art3D stem face plate close-up

Related articles:

60mm stem

25.4mm bar clamp;

UB 60mm stem

60mm long;

Lightweight sleep system

Getting a good night sleep in variable conditions with a minimum of weight requires a sleep system that is flexible and incorporates as many multi-use components as possible.

Syntace F109 Stem

Vital stats

UNO Stem OSC

Quick facts:

Refinishing carbon parts

Carbon parts like seat post tubes, handle bars and derailleur side plates get scratched up over time. Typically, what gets damaged is the "cosmetic" clear coat layer. This is not a structural part of the component....

Content-type: text/html Error
Sorry, the application you are using has encountered an error.

Please click on this link to report the error: REPORT ERROR