Rockshox Reverb dropper seat post


Rockshox Reverb dropper post

This version features:

  • 125mm drop;
  • 31.6mm diameter;
  • non-stealth remote connection.

Weight is 567g.

Tuning potential

  • seat clamp bolts weight 18g;
  • lower cradle weighs 24g;
  • top plate weighs 28g.

Bolts could be replaced with Ti versions (probably a 10g saving) and top plate and cradle could also be replaced with lighter items but radius on the top of post doesn't seem to match any of the cradles that I have spare.  Reality is that there is probably not a lot of weight to be saved at all, and quite some potential to reduce reliability.

Amazon sells a range of Reverbs in various drops (100mm and 125mm) as well as 30.9 and 31.6mm diameters.

Related articles:

Rockshox low friction seals

Following on from Fox releasing low friction SKF made seals for their forks, Rockshox are now producing their own low friction versions. These seals are black in colour, whereas the older versions were grey.

Rockshox RCT3 damper

There's plenty of misinformation and hearsay out on the interwebs about how the Rockshox RCT3 damper works, but almost a complete lack of details. I've completely disassembled by RCT3 to understand how it works. Here are my ...

Rockshox SID 15mm lowers

15mm maxle lite lowers

Rockshox SID Damping Fluid Leak

On a ride recently, my forks starting to feel harsh and when I stopped to take a look it was obvious from the dirt on my stanchions that I wasn't getting full travel from the fork.

Rockshox SID Race 2007

Fork with 215mm steerer, starnut installed and v-brake bosses weighs 1318g.

Rockshox SID problem diagnosis

Note: these diagnostic procedures will apply to pretty much any Rockshox dual air fork including Reba, Reba 29er and Revelation forks.

Content-type: text/html Error
Sorry, the application you are using has encountered an error.

Please click on this link to report the error: REPORT ERROR