Scott branded grips


Scott branded wire-on grips on scale weighing 84g

These grips are a good diameter and are nice and comfortable. They are a dual density design with a soft black rubber outer and harder grey rubber inner. They feature grooves at either end so they can be wired on. They do not fit very snugly on the bars so these are one of the few sets of grips I've come across that really need to be glued and wired on to stop them from rotating on the bars.

What do the Scott dual density grips weigh?

The grips weigh 84g for a set.

You can get a similar level of comfort with the ESI chunky grips and also achieve a small weight saving (ESI chunky's weigh 59g for the set).

Related articles:

KCNC foam grips

These seem to be the modern equivalent of the now discontinued Titec Pork Rinds; Design, foam type and weight (17g) are all but identical to the Pork Rinds.  It's good to be ...

XXF Foam Grips

very similar to Tioga pork rinds , KCNC foam grips and a number of others, foam density feels much the same;

ESI Silicon Grips

Not much to say! They're grips made out of silicon. They feel quite comfortable, although I can't really tell that they absorb any more shock than good rubber grips.

Procraft foam grips

These are made of what feels like fairly tough foam.  They weigh 20g for the pair.  The foam is contoured to provide a bulge for your palm when holding the bars.

Ritchey WCS ergo foam grips

Quick facts:

How to change grips the easy way

Changing a set of grips should take less than 5 minutes and you shouldn't even break a sweat.

Content-type: text/html Error
Sorry, the application you are using has encountered an error.

Please click on this link to report the error: REPORT ERROR