Syntace Duraflite Carbon Flat Bar


Vital stats

  • 600mm wide;
  • titanium mesh reinforcement at bar ends and in bar center;
  • compatible with bar ends;
  • weight: 143g.

Issues

To use these bars with bar-ends you need to use some end plugs to reinforce the bar. For the carbon Syntace bars you need the Barend Plug CRB.


Here's the problem - the hole in the end of the bars is not big enough to get the CRB plugs in. The plugs only go in a couple of mm and then get so tight that I'd be worried to force them in further as the bars may split!

The barend plugs have an outside diameter of 17mm, the inside of the Syntace Duraflite Carbon Bar is 16.5mm. That is far too much of a size discrepancy for these plugs to work.

Related articles:

Carbon fibre brake lever DIY

I bent a brake lever on my Hygia SLP brakes . I'd already tried to got in contact with the local distributor about a bleed kit and olives. Disappointingly, I didn't hear anything back ...

eXotic carbon Ti seatpost

Carbon seatpost with alu reinforcing around the seatpost clamp, carbon cradle and Ti bolts.

Carbon no-name seatpost

31.6mm full carbon seatpost in 400mm length. Weighs 203g. Looks like a copy of the Ritchey carbon seatpost. Clamp would not be compatible with oval rails.

Refinishing carbon parts

Carbon parts like seat post tubes, handle bars and derailleur side plates get scratched up over time. Typically, what gets damaged is the "cosmetic" clear coat layer. This is not a structural part of the component....

Syntace F109 Stem

Vital stats

KCNC BE1 bar ends


Content-type: text/html Error
Sorry, the application you are using has encountered an error.

Please click on this link to report the error: REPORT ERROR