Exotic Carbon Fibre Front Derailleur Clamp


What's it weigh?

The Exotic carbon fibre front derailleur clamp weighs 5g for the 34.9mm size. The weight is extremely competitive and around 10g less than the equivalent KCNC aluminium clamp. Indeed, the Exotic clamp weighs less than the Parlee Front Derailleur Clamp (7.5g) and around the same as the MCFK clamp (~6g).

What's it cost?

The best thing about this clamp is the low cost - under AUD$20 delivered from CarbonCycles. Most other carbon fibre clamps in this weight range are around $80-100.

Any negatives?

Yes, the clamp needs a slight amount of material removed where the clamp band comes together to ensure that it clamps up properly. See the image below:


Related articles:

Ultralight carbon fibre chain guide

This is for my daughter's Anthem X0 that uses an XT crankset with a 28t chainring in the granny position. The bike has a 68mm BB so I'll make it mount on the DS BB replacing the DS 2....

Fixing a twisted rear derailleur

If you ride off-road its almost inevitable that at some stage you'll damage your rear derailleur. Bending it back into shape can be a little tricky. I have used the approach outlined below with good results:

eXotic carbon Ti seatpost

Carbon seatpost with alu reinforcing around the seatpost clamp, carbon cradle and Ti bolts.

9 speed clutch rear derailleur mash up

There are several ways to get a 9 speed clutch derailleur.  The most popular is to use a Shimano 10 speed shadow plus rear derailleur like a Zee, Saint, SLX, ...

Refinishing carbon parts

Carbon parts like seat post tubes, handle bars and derailleur side plates get scratched up over time. Typically, what gets damaged is the "cosmetic" clear coat layer. This is not a structural part of the component....

Carbon fibre brake lever DIY

I bent a brake lever on my Hygia SLP brakes . I'd already tried to got in contact with the local distributor about a bleed kit and olives. Disappointingly, I didn't hear anything back ...

Content-type: text/html Error
Sorry, the application you are using has encountered an error.

Please click on this link to report the error: REPORT ERROR