Fox genuine equivalent is part number 398-00-761 "Tooling: DPX2, REB Cap Driver"
Related articles:
Fork rebound adjustment
Start with rebound in the fastest setting and the lockout off. Find a good, smooth fast corner you're comfortable attacking repeatedly. Keep adding more rebound damping until the bike feels nicely settled mid corner and through the ...
Fox DPX2 IFP Cap Tool
The IFP cap should only really be hand-tight, but just in case it isn't, I made this tool to undo/tighten it.
Fox 34 FIT 4 damper
Valving on Fox 34 FIT4 damper compression stack
Fox 32 RL fork
Rear of fork
Fox 34 air cap tool
Fox 34 forks need a 26mm socket to remove the air cap. A normal socket will typically have a taper at the bottom which needs to be ground off to give it a flat bottom so it will ...
XD driver bodies for various hubs
To run SRAM XX1 or XX0 11 speed you need a special XD driver body for your hub. A number of popular hubs have conversion driver/freehub bodies available: