Hub data
| WL, width from center to left flange | 24.0 |
| WR, width from center to right flange | 35.0 |
| dL, left flange diameter | 55.5 |
| dR, right flange diameter | 55.5 |
| S, spoke hole diameter | 2.0 |
Rim data
- podium MMX rim with DT Swiss 12mm alu nipples - measured ERD at 544mm
Spoke length data
| cross | left length | right length |
| 0 | 244.4 | 245.7 |
| 1 | 246.8 | 248.1 |
| 2 | 253.3 | 254.5 |
| 3 | 262.7 | 264.0 |
| 4 | 273.5 | 274.6 |
Build notes
Wheel went together nicely. Rim holes lubed with cotton bud dipped in anti-seize, spoke threads lubed with Mobil 1. Spoke length of 264mm DS and 262mm NDS worked well. Initial spoke wind up with nipple driver resulted in dish being offset about 3mm towards NDS (disc side). Meant that achieving final tension was done using DS spokes. These have less tension than NDS so made spoke wind up less of an issue.
Final build weight 568g:
Tune hub features some neat machining on the DS:
