Using Cannondale hollowgram cranks with press-fit BB92 bottom brackets

This is a more specific article than Using 30mm spindle cranks with press-fit BB92 bottom brackets and is based on fitting Cannondale Hollowgram SISL cranks with a direct mount chainring to a Trance X 29er frame.

After a reasonable amount of trial and error I found that the following works well:

  • BB92 x 30mm BB kit from RWS with Enduro press fit bearings;
  • 125mm spindle (part number A3148)
  • 1mm spacer each side;
  • 0.5mm additional bearing shield either side;
  • wavy washer on non-drive side.

Related articles:

Using 30mm spindle cranks with press-fit BB92 bottom brackets

Using 30mm spindle cranks with press-fit BB92 bottom brackets involves a few easy steps:

Cannondale Hollowgram SiSL crankset

Weight breakdown

Cannondale Hollowgram axle weights

ModelLength (mm)
Weight (g)
Si
121116g
SiSL A3148
12594g
Si
131105g
Si A3009-137L-E19
137107g

Token Carbon Bottom Bracket

Vital stats:

Using 10 speed rear derailleur with 11 speed shifter and cassette

Facts and figures

e*thirteen XC BSA bottom bracket 68/73mm cupset

This is the thing to use if you have a 68mm BSA frame and want to use the Specialized s-works carbon mountain crank arms.