Tektro linear pull brake lever


Tektro linear pull brake lever
  • weighs 94g;
  • nicely adjustable close to bars for smaller hands;
  • lightweight, slotted aluminium barrel adjuster for easy cable replacement.

Related articles:

Magura MT8 Brake Levers

Two sets of levers, clamps and master cylinders weigh 112g. Levers, master cylinder body and lever clamp are made from carbon fiber / carbotecture.

Magura MT brake lever service

After some use the master cylinder piston can get sticky. A clean and re-grease Will have it performing like new again.

EBC red disc brake pads

I've been using a set of these on the front with my Magura MT8/MTS brakes:

Jagwire Pro Disc Brake Pads

Quick facts:

Hygia SLP disc brake tuning

The Hygia SLP brakes start out as a fairly light set of disc brakes. The rotors at less than 80g each are already about as light as you can go without resorting to titanium, aluminum ...

Lightweight disc brake rotors

Here's some information I have collected on 180, 160 and 140mm lightweight disc brake rotors: