Lauf fork


Lauf fork

This is the 29er version and has an axle-to-crown measurement of 485mm and a 48mm offset/rake.  Weight is an amazing 990g but travel is only 60mm.

One thing to note with this fork is that you must use a 180mm or larger rotor.  The design of the axle interface means that you can't use a rotor smaller than 180mm.

Related articles:

Fox 32 RL fork

Rear of fork

Frankenforks

There seems to be a surprising amount of interchangeability between the 32mm chassis forks from Rockshox, Fox and even Marzocchi. Here are some examples of frankenforks that people have put together:

24" air forks

There are very few air sprung forks for 24" wheels:

Manitou 1 Sport Fork

I've been looking around for a fork that I could use as the basis for building a custom 20" fork for my daughter's BMX based 20" MTB. My local bike store managed to set me up with a ...

Fork and shock oils

Just my quick notes on the fork and shock oils I have been using

Fox Terralogic fork

This version has the following vital stats: