DT Swiss 240s rear hub tools

DT Swiss promote their 240s rear hub as a tool-less design. Not sure how the justify that claim when to replace all of the bearings you really need the ratchet removal tool as a bare minimum. In reality the complete set of hub tools makes the job fairly straightforward, but as the picture below shows, its hardly "tool-less".

This kit is from Sellution Components.  Look for DT Swiss Hub Service Tool Kit (240S, 240+s, 440-FR) on Amazon.

Related articles:

Rear hub bearing sizes

I like to keep at least one set of replacement bearings on hand for every hub that I have.  For this purpose, I've prepared the table below which lists the bearing sizes for all of the hubs ...

Suspension bearing tools

Bearings were getting a little crunchy on my Trance 29er so it was time to strip it down and replace them.

A2Z rear hub replacement

I originally built this wheel with a Crest 32h rim and DT Swiss Supercomp spokes.  The A2Z rear hub has subsequently started to make some noise under heavy load.  It's still perfectly functional, but for ...

SRAM X.7 rear derailleur

Shimano Zee Rear Derailleur

Comes in two different versions:

Tune Kong Rear Disc Hub

For 2011 the Tune Kong rear disc hub has dropped some weight - claimed weight is 205g, mine weighed 212g: